2,163 research outputs found

    Accurate Phase Calibration for Digital Beam-Forming in Multi-Transceiver HF Radar System

    Get PDF
    The TIGER-3 radar is being developed as an “all digital” radar with 20 integrated digital transceivers, each connected to a separate antenna. Using phased array antenna techniques, radiated power is steered towards a desired direction based on the relative phases within the array elements. This paper proposes an accurate phase measurement method to calibrate the phases of the radio output signals using Field Programmable Gate Array (FPGA) technology. The method sequentially measures the phase offset between the RF signal generated by each transceiver and a reference signal operated at the same frequency. Accordingly, the transceiver adjusts its phase in order to align to the reference phase. This results in accurately aligned phases of the RF output signals and with the further addition of appropriate phase offsets, digital beamforming (DBF) can be performed steering the beam in a desired direction. The proposed method is implemented on a Virtex-5 VFX70T device. Experimental results show that the calibration accuracy is of 0.153 degrees with 14 MHz operating frequency

    Monolithic Pixel Sensors in Deep-Submicron SOI Technology

    Full text link
    Monolithic pixel sensors for charged particle detection and imaging applications have been designed and fabricated using commercially available, deep-submicron Silicon-On-Insulator (SOI) processes, which insulate a thin layer of integrated full CMOS electronics from a high-resistivity substrate by means of a buried oxide. The substrate is contacted from the electronics layer through vias etched in the buried oxide, allowing pixel implanting and reverse biasing. This paper summarizes the performances achieved with a first prototype manufactured in the OKI 0.15 micrometer FD-SOI process, featuring analog and digital pixels on a 10 micrometer pitch. The design and preliminary results on the analog section of a second prototype manufactured in the OKI 0.20 micrometer FD-SOI process are briefly discussed.Comment: Proceedings of the PIXEL 2008 International Workshop, FNAL, Batavia, IL, 23-26 September 2008. Submitted to JINST - Journal of Instrumentatio

    Embedded, micro-interdigitated flow fields in high areal-loading intercalation electrodes towards seawater desalination and beyond

    Full text link
    Faradaic deionization (FDI) is a promising technology for energy-efficient water desalination using porous electrodes containing redox-active materials. Herein, we demonstrate for the first time the capability of a symmetric FDI flow cell to produce freshwater (<17.1 mM NaCl) from concentrated brackish water (118mM), to produce effluent near freshwater salinity (19.1 mM) from influent with seawater-level salinity (496 mM), and to reduce the salinity of hypersaline brine from 781 mM to 227 mM. These remarkable salt-removal levels were enabled by using flow-through electrodes with high areal-loading of nickel hexacyanoferrate (NiHCF) Prussian Blue analogue intercalation material. The pumping energy consumption due to flow-through electrodes was mitigated by embedding an interdigitated array of <100 ÎĽ\mum wide channels in the electrodes using laser micromachining. The micron-scale dimensions of the resulting embedded, micro-interdigitated flow fields (eÎĽ\mu-IDFFs) facilitate flow-through electrodes with high apparent permeability while minimizing active-material loss. Our modeling shows that these eÎĽ\mu-IDFFs are more suitable for our intercalation electrodes because they have >100X lower permeability compared to common redox-flow battery electrodes, for which millimetric flow-channel widths were used exclusively in the past. Total desalination thermodynamic energy efficiency (TEE) was improved by more than ten-fold relative to unpatterned electrodes: 40.0% TEE for brackish water, 11.7% TEE for hypersaline brine, and 7.4% TEE for seawater-salinity feeds. Water transport between diluate and brine streams and charge efficiency losses resulting from (electro)chemical effects are implicated as limiting energy efficiency and water recovery, motivating their investigation for enhancing future FDI performance.Comment: 70 pages, 23 figures. Energy Environ. Sci. (2023

    Flexural-strengthening efficiency of cfrp sheets for unbonded post-tensioned concrete T-beams

    Get PDF
    There has been a limited number of studies about the flexural behavior of unbonded post-tensioned concrete (UPC) beams strengthened with carbon fibre reinforced polymer (CFRP) and these studies have not systematically examined the effect of CFRP sheets on the tendon strain as well as the strengthening efficiency. Moreover, current design guides for the FRP strengthening techniques have not provided any design procedure for UPC structures. This study, thus, investigates the influence of CFRP sheet ratio on the flexural behavior of CFRP-strengthened UPC T-beams and quantifies its effect upon tendon behavior in this kind of UPC beams. The testing program consisted of nine large-scale UPC T-beams strengthened by different layers of CFRP sheets with or without CFRP U-wrapped anchors. The experimental results have shown that the use of CFRP sheets and CFRP U-wrapped anchors significantly affected the tendon strain. The FRP reinforcement ratio governed the flexural capacity, the crack width, the mid-span displacement, and the ductility of the beams in which the strengthening efficiency reduces with the increased number of CFRP layers. The configuration of the CFRP U-wrapped anchors affected the strain of the CFRP sheets, the failure mode and thus the beam behavior. In addition, semi-empirical equations were proposed to estimate the actual strain of unbonded tendons in which the effect of the CFRP sheets and CFRP U-wrapped anchors have been taken into consideration. The proposed equations, which are simple to use, yield reliable predictions with a small variation

    Theory of the optical absorption of light carrying orbital angular momentum by semiconductors

    Full text link
    We develop a free-carrier theory of the optical absorption of light carrying orbital angular momentum (twisted light) by bulk semiconductors. We obtain the optical transition matrix elements for Bessel-mode twisted light and use them to calculate the wave function of photo-excited electrons to first-order in the vector potential of the laser. The associated net electric currents of first and second-order on the field are obtained. It is shown that the magnetic field produced at the center of the beam for the â„“=1\ell=1 mode is of the order of a millitesla, and could therefore be detected experimentally using, for example, the technique of time-resolved Faraday rotation.Comment: Submitted to Phys. Rev. Lett. (23 Jan 2008

    Kinetics of four-wave mixing for a 2D magneto-plasma in strong magnetic fields

    Full text link
    We investigate the femtosecond kinetics of an optically excited 2D magneto-plasma at intermediate and high densities under a strong magnetic field perpendicular to the quantum well (QW). We assume an additional weak lateral confinement which lifts the degeneracy of the Landau levels partially. We calculate the femtosecond dephasing and relaxation kinetics of the laser pulse excited magneto-plasma due to bare Coulomb potential scattering, because screening is under these conditions of minor importance. In particular the time-resolved and time-integrated four-wave mixing (FWM) signals are calculated by taking into account three Landau subbands in both the valance and the conduction band assuming an electron-hole symmetry. The FWM signals exhibit quantum beats mainly with twice the cyclotron frequency. Contrary to general expectations, we find no pronounced slowing down of the dephasing with increasing magnetic field. On the contrary, one obtains a decreasing dephasing time because of the increase of the Coulomb matrix elements and the number of states in a given Landau subband. In the situation when the loss of scattering channels exceeds these increasing effects, one gets a slight increase at the dephasing time. However, details of the strongly modulated scattering kinetics depend sensitively on the detuning, the plasma density, and the spectral pulse width relative to the cyclotron frequency.Comment: 13 pages, in RevTex format, 10 figures, Phys. Rev B in pres

    Simple clinical and laboratory predictors to improve empirical treatment strategies in areas of high scrub typhus and dengue endemicity, central Vietnam

    Get PDF
    BACKGROUND: Dengue fever is highly endemic in Vietnam, but scrub typhus-although recognized as an endemic disease-remains underappreciated. These diseases together are likely to account for more than half of the acute undifferentiated fever burden in Vietnam. Scrub typhus (ST) is a bacterial disease requiring antimicrobial treatment, while dengue fever (DF) is of viral etiology and does not. The access to adequate diagnostics and the current understanding of empirical treatment strategies for both illnesses remain limited. In this study we aimed to contribute to the clinical decision process in the management of these two important etiologies of febrile illness in Vietnam. METHODS: Using retrospective data from 221 PCR-confirmed scrub typhus cases and 387 NS1 protein positive dengue fever patients admitted to five hospitals in Khanh Hoa province (central Vietnam), we defined predictive characteristics for both diseases that support simple clinical decision making with potential to inform decision algorithms in future. We developed models to discriminate scrub typhus from dengue fever using multivariable logistic regression (M-LR) and classification and regression trees (CART). Regression trees were developed for the entire data set initially and pruned, based on cross-validation. Regression models were developed in a training data set involving 60% of the total sample and validated in the complementary subsample. Probability cut points for the distinction between scrub typhus and dengue fever were chosen to maximise the sum of sensitivity and specificity. RESULTS: Using M-LR, following seven predictors were identified, that reliably differentiate ST from DF; eschar, regional lymphadenopathy, an occupation in nature, increased days of fever on admission, increased neutrophil count, decreased ratio of neutrophils/lymphocytes, and age over 40. Sensitivity and specificity of predictions based on these seven factors reached 93.7% and 99.5%, respectively. When excluding the "eschar" variable, the values dropped to 76.3% and 92.3%, respectively. The CART model generated one further variable; increased days of fever on admission, when eschar was included, the sensitivity and specificity was 95% and 96.9%, respectively. The model without eschar involved the following six variables; regional lymphadenopathy, increased days of fever on admission, increased neutrophil count, increased lymphocyte count, platelet count >/= 47 G/L and age over 28 years as predictors of ST and provided a sensitivity of 77.4% and a specificity of 90.7%. CONCLUSIONS: The generated algorithms contribute to differentiating scrub typhus from dengue fever using basic clinical and laboratory parameters, supporting clinical decision making in areas where dengue and scrub typhus are co-endemic in Vietnam
    • …
    corecore